A cutaway of the General Electric fuel cell that powered NASA's Gemini spacecraft, an early proton exchange membrane fuel cell, mounted on a wooden display stand

Credit Guides

PEM Fuel Cells: How the Tech Inside Hydrogen Trucks Actually Works

PEM Fuel Cells: How the Tech Inside Hydrogen Trucks Actually Works

How a PEM fuel cell works, how efficient it is (about 60%), what it costs, how long it lasts and the 30% Section 48E tax credit that applies.

Author -

Paulestini Francois

Published -

READ TIME

8 min read

The same kind of fuel cell that powered NASA's Gemini spacecraft in the 1960s now runs hydrogen buses, warehouse forklifts and backup generators. It's called a PEM fuel cell, and it's the most common way to turn hydrogen back into electricity. Here's how a PEM fuel cell works, how efficient it is, what it costs, how long it lasts and how the 30% fuel cell tax credit applies.

QUICK ANSWER

A PEM fuel cell (proton exchange membrane fuel cell) makes electricity from hydrogen and oxygen, leaving only water and heat. A platinum catalyst splits hydrogen into protons and electrons; protons cross a thin polymer membrane while electrons flow through an outside circuit as current. They run at about 80°C and reach about 60% efficiency.

KEY FACTS

  • How does a PEM fuel cell work? A platinum catalyst splits hydrogen into protons and electrons. Protons cross the membrane, electrons power the load, and both join oxygen to form water.

  • What is a PEM hydrogen fuel cell made of? A fuel cell stack of many cells, each built around a membrane electrode assembly: a polymer electrolyte membrane between two platinum catalyst layers.

  • What is PEM fuel cell efficiency? About 60% on pure hydrogen and about 40% on reformed fuel, per the U.S. Department of Energy.

  • What temperature does a PEM fuel cell run at? Around 80°C (176°F), and below 120°C, which lets it start quickly.

  • What is the PEM fuel cell cost? DOE puts heavy-duty truck systems near $170 per kW, with targets of $80 by 2030; its stationary target is $1,000 per kW.

  • What hydrogen purity does a PEM fuel cell need? At least 99.97% hydrogen with no more than 0.2 ppm carbon monoxide under California's rule, based on SAE J2719.

  • How does PEM compare with a solid oxide fuel cell? Solid oxide cells run at 500°C to 1,000°C and suit large, always-on power; PEM runs cooler and starts faster.

  • Is there a fuel cell tax credit? Yes. Section 48E gives qualified fuel cell property a flat 30% investment tax credit (ITC) for construction beginning after 2025.

What is a PEM fuel cell?

A PEM fuel cell is a device that turns hydrogen and oxygen into electricity, with water and heat as the only byproducts. PEM stands for proton exchange membrane (also called polymer electrolyte membrane), a thin plastic sheet that lets protons through but blocks electrons. It runs at about 80°C, starts quickly and is the main fuel cell used in vehicles.

The Department of Energy describes PEM fuel cells as using a solid polymer electrolyte and porous carbon electrodes coated with a platinum or platinum alloy catalyst. They need only hydrogen, oxygen from the air and water to operate, and they offer high power density with low weight and volume compared with other fuel cells.

The technology is older than most people think. The fuel cells that powered NASA's two-astronaut Gemini spacecraft on ten missions in 1965 and 1966 used a proton exchange membrane coated with platinum, according to the Smithsonian's record of the General Electric unit pictured at the top of this page. Today the same basic design runs buses, trucks, forklifts and backup generators.

How does a PEM fuel cell work?

Hydrogen flows to the anode, where a platinum catalyst splits it into protons and electrons. The protons pass through the membrane to the cathode. The electrons can't, so they travel through an outside circuit, which is the electric current. At the cathode, protons, electrons and oxygen from the air combine into water.

How a PEM fuel cell works: hydrogen enters at the anode, where a platinum catalyst splits it into protons and electrons; only protons cross the proton exchange membrane; electrons flow through an outside circuit to power the load, then join oxygen from the air at the cathode to make water and heat.

One cell produces less than one volt, so manufacturers stack hundreds of cells in series to reach useful voltages. That's the fuel cell stack. Each cell is built around a membrane electrode assembly: the membrane, the two catalyst layers and gas diffusion layers, squeezed between bipolar plates that feed in the gases and carry out the current.

The stack is only part of the system. A complete PEM fuel cell power plant adds a hydrogen supply, an air compressor or blower, humidifiers to keep the membrane wet, a cooling loop and power electronics to convert direct current for the load. The tax code treats that whole package as one unit: under Section 48(c)(1), a fuel cell power plant is the stack plus its associated balance of plant.

How efficient is a PEM fuel cell?

A PEM fuel cell is about 60% efficient at turning hydrogen into electricity, and about 40% when it runs on hydrogen reformed from natural gas or another fuel, according to the Department of Energy. At 60%, a PEM fuel cell uses about 0.05 kg of hydrogen for every kilowatt-hour it produces.

PEM fuel cells by the numbers: 80 degrees Celsius (176 degrees Fahrenheit) typical operating temperature, 60% efficiency on pure hydrogen, 99.97% hydrogen purity required and a 30% Section 48E fuel cell tax credit. DOE heavy-duty truck fuel cell system cost: $200 per kW baseline, $170 recent, $80 target for 2030 and $60 ultimate target. Durability targets: 25,000 hours for trucks and 80,000 hours for stationary systems by 2030.

Those figures come from the DOE's comparison of fuel cell technologies, which reports direct-current electrical efficiency on a lower heating value basis. A kilogram of hydrogen holds about 33.3 kWh of energy, so a fuel cell at 60% turns each kilogram into roughly 20 kWh of electricity. The rest leaves as heat, which some stationary systems capture for buildings.

The DOE's 2024 Multi-Year Program Plan sets a 68% peak efficiency target for heavy-duty truck fuel cells by 2030.

How does a PEM fuel cell compare with other fuel cells?

PEM is the coolest-running and fastest-starting major fuel cell type, which is why it's the main choice for vehicles and backup power. Solid oxide fuel cells run at 500°C to 1,000°C and molten carbonate at 600°C to 700°C, which makes them better for large, always-on power plants. PEM's trade-offs are costly platinum and sensitivity to impure fuel.

The DOE's comparison table covers five main fuel cell families: PEM, alkaline, phosphoric acid, molten carbonate and solid oxide. PEM units typically range from under 1 kW to 100 kW per module, while solid oxide systems go up to 2 MW and molten carbonate up to 3 MW. That's why data center projects often use high-temperature fuel cells running on natural gas, while PEM is used where hydrogen is delivered and the load starts and stops. The chart below compares all five by temperature, size and efficiency.

Polymer electrolyte membrane (PEM): operating temperature
~80°CThis article
0°C200°C400°C600°C800°C1000°CPEMAlkalinePhosphoric acidMolten carbonateSolid oxide
PEMOther fuel cellsCircle: typical PEM temperature

Polymer electrolyte membrane (PEM) fuel cells are used for vehicles, forklifts, backup power, portable power, distributed generation. Strengths: low temperature, quick start-up and load following, solid electrolyte. Challenges: expensive platinum catalysts, sensitive to fuel impurities such as carbon monoxide.

Source: U.S. Department of Energy, Comparison of Fuel Cell Technologies. Efficiency is direct-current electrical efficiency on a lower heating value basis. Bars for PEM and alkaline start at room temperature because DOE lists only a maximum. All of these fuel cells can qualify for the Section 48E investment tax credit when construction begins after 2025.

What is a PEM fuel cell used for?

PEM fuel cells power hydrogen cars, buses and heavy trucks, warehouse forklifts, backup generators for telecom towers and data centers, and portable power. The DOE lists transportation, specialty vehicles, backup power, portable power and distributed generation as PEM's main markets, because the cells start fast and follow changing loads.

An AC Transit hydrogen fuel cell bus labeled zero emission, parked beneath a freeway overpass in the San Francisco Bay Area

Transit is one of the most visible uses. Agencies such as AC Transit in the San Francisco Bay Area have run hydrogen fuel cell buses for years. Heavy trucks are the DOE's current priority: its cost and durability targets now focus on long-haul fuel cell trucks rather than cars.

Forklifts are the quiet success story. Warehouses use PEM fuel cells instead of swapping heavy batteries, because a forklift can be refueled in a few minutes. Stationary PEM systems can also stand in for diesel backup generators, with no exhaust at the site. If hydrogen is your fuel, the bigger cost question is usually what hydrogen costs per kilogram delivered to your site.

How long does a PEM fuel cell last?

Lifetime depends on the use. The DOE's 2030 targets call for 25,000 operating hours for heavy-duty truck fuel cells, rising to 30,000 hours long term, and 80,000 hours for stationary fuel cells. For data centers, the DOE set a long-term goal of 130,000 hours, or about 15 years of nonstop operation.

PEM fuel cells wear out gradually rather than failing all at once. The platinum catalyst loses active surface, and the membrane thins and develops pinholes, especially when the stack cycles between high and low power or runs hot and dry. Over a long project life, budget for a possible stack replacement, a cost the calculator below doesn't include.

The DOE targets come from its 2024 program plan, which ties the data center goal to primary power systems that "must operate 24/7 for 365 days per year."

How much does a PEM fuel cell cost?

The DOE's 2024 program plan puts heavy-duty truck fuel cell systems at about $170 per kilowatt, down from a $200 per kilowatt baseline, with a target of $80 per kW by 2030 and $60 long term. Stationary fuel cell systems are further from target: the DOE's 2030 goal is $1,000 per kW. Hydrogen fuel is usually the larger ongoing cost.

The truck figures are modeled costs at high manufacturing volumes, not what a small buyer pays for a single unit today. Platinum is a big lever: the DOE's 2030 truck targets include a total platinum-group-metal loading of 0.3 mg per square centimeter. Installed costs for stationary systems also include site work, hydrogen storage and interconnection, so quotes vary widely.

Fuel adds up quickly. The DOE models delivered and dispensed hydrogen from electrolysis at $12 to $16 per kg at fueling stations. At $12 per kg and 60% efficiency, fuel alone costs about $0.60 per kWh, far above grid power. That's why PEM fuel cells win where their speed, quiet operation or zero local emissions matter more than fuel price. Use the calculator below to size your own system.

Hydrogen used per day
150kg0.050 kg per kWh
Installed cost at your price$750,000
Installed cost at DOE's $1,000/kW target$250,000
Section 48E credit (30%)$225,000
Hydrogen fuel per year$657,066
Electricity per day3,000 kWh
Water made per day1,341 L
Fuel cost per kWh$0.60
Credit cash if sold$205,425

A 250 kW PEM fuel cell running 12 hours a day at 60% efficiency makes 3,000 kWh and burns about 150 kg of hydrogen a day, leaving about 1,341 liters of water. At $12/kg, fuel alone costs about $0.60 per kWh. At $3,000/kW installed, the 30% Section 48E credit is worth $225,000, or about $205,425 in cash at 91.3 cents.

Illustrative estimate, not tax or engineering advice. Uses 33.33 kWh per kg of hydrogen (lower heating value) and ignores start-up, idling and degradation. Installed cost and hydrogen price are your assumptions; DOE's $1,000/kW is a 2030 target for stationary systems, not today's price. The 48E credit requires at least 0.5 kW of capacity and more than 30% electrical efficiency, and foreign entity of concern rules apply.

What kind of hydrogen does a PEM fuel cell need?

PEM fuel cells need very pure hydrogen. California's hydrogen fuel rule, which follows the SAE J2719 standard, requires at least 99.97% hydrogen and no more than 0.2 parts per million of carbon monoxide. Carbon monoxide and sulfur bind to the platinum catalyst and cut power, so impure hydrogen shortens stack life.

That purity requirement shapes the supply chain. Hydrogen made by steam methane reforming has to be cleaned up, typically with pressure swing adsorption, before it reaches a PEM fuel cell. Hydrogen from a PEM electrolyzer, which is essentially a PEM fuel cell run in reverse, comes out cleaner but still has to be dried.

The source of the hydrogen also matters for taxes. A producer making low-carbon hydrogen can claim the Section 45V clean hydrogen production credit, which can lower what fuel cell users pay for fuel under a supply contract.

What tax credits apply to PEM fuel cells?

A PEM fuel cell power plant can qualify for the Section 48E investment tax credit (ITC) at a flat 30% of eligible cost when construction begins after 2025. The system must have at least 0.5 kW of capacity and more than 30% electrical efficiency. Unlike solar or wind, fuel cells get no bonus adders and have no wage requirement.

Section 48E(j) sets the 30% rate and says it "shall not be increased or otherwise adjusted" by other provisions, according to the statute. The fuel cell must meet the definition in Section 48(c)(1), and foreign entity of concern rules apply to projects that start construction after 2025. Our fuel cell tax credit guide covers the phase-down and the rules for natural gas fuel cells.

Owners without a large tax bill can still use the credit. Under Section 6418, the ITC can be sold to a corporate buyer for cash; see how selling clean energy tax credits works. On a $750,000 system, a 30% credit is worth $225,000 before any discount on sale.

Sources

Frequently Asked Questions

What is the difference between a PEM fuel cell and a PEM electrolyzer?

They use the same kind of membrane but run in opposite directions. A PEM fuel cell combines hydrogen and oxygen to make electricity and water. A PEM electrolyzer uses electricity to split water into hydrogen and oxygen. Some reversible systems can do both.

Can a PEM fuel cell run on natural gas?

Why do PEM fuel cells use platinum?

How much hydrogen does a PEM fuel cell use?

Can Cenet Capital help me sell a fuel cell tax credit?

Installing fuel cells for your business?

A PEM fuel cell power plant that begins construction after 2025 can qualify for a flat 30% Section 48E investment tax credit, even if your company doesn't owe enough tax to use it. Cenet Capital helps fuel cell owners and developers estimate the credit and sell it to corporate buyers for cash. Tell us about your project.

Interested in selling your clean energy tax credits?

  • More Insights

Cenet Capital was founded in on a simple premise: public markets price in consensus faster than they price in research. A small team built a trading book around that idea concentrated, thesis-driven, willing to be early.

Follow Us:

Cenet Capital was founded in on a simple premise: public markets price in consensus faster than they price in research. A small team built a trading book around that idea concentrated, thesis-driven, willing to be early.

Follow Us:

Cenet Capital was founded in on a simple premise: public markets price in consensus faster than they price in research. A small team built a trading book around that idea concentrated, thesis-driven, willing to be early.

Follow Us: